آلة حاسبة هندسية

Series Capacitor and Balancing Resistor Calculator

HV inC1C2Rb1Rb2VxV1V20 الخامس

كيفية قراءة الرسم التخطيطي. Two capacitors in series across the DC bus, each with a balancing resistor across it. Leakage, not capacitance, sets the steady-state division; the resistors swamp the leakage difference and hold the midpoint at Vx.

Two capacitors in series do not share voltage by capacitance alone; under steady DC, leakage decides it. This calculator gives total capacitance, the capacitive split and the balancing resistor that dominates leakage spread.

المدخلات

النتائج

Series capacitance
-
Voltage across C1
-
Voltage across C2
-
Balancing resistor per unit
-
Dissipation per resistor
-

الصيغة

1/C = 1/C1 + 1/C2. For AC or fast transients the voltage divides inversely with capacitance: V1 = V × C2 / (C1 + C2). For steady DC the split follows leakage current, so equal capacitors with unequal leakage can drift far apart; a resistor across each unit forces the split to follow the resistor ratio.

ما لا تتضمنه الآلة الحاسبة

اختيار الأجزاء

The balancing resistor is a high-value thick film part: مستو to 35 kV per body, or a شريط الطاقة فوق ذلك.

أرسل القيم المحسوبة والرسوم الجمركية: اطلب عرض أسعار فنيالرد خلال 6 ساعة.